cricut question
Post ReplyPost New TopicPosted 4/6/2013 by DanaM. in General Scrappin'
 

DanaM.
PeaNut

PeaNut 117,179
November 2003
Posts: 375
Layouts: 0

Posted: 4/6/2013 7:58:12 PM
Having problems.. it is tearing my paper when it changes direction(like the points of the star) I replaced the blade and it seems worse? ugh..pretty sure my settings are good, it was cutting before(same paper speed etc). I have cut alot of the same shape, tried flipping my mat around so it wouldn't be in a "rut". I am frustrated! oh and my speed is medium.
Suggestions?
Thanks!
Dana

MississippiScrapper
PeaNut

PeaNut 478,124
August 2010
Posts: 315
Layouts: 1

Posted: 4/6/2013 8:00:56 PM
Have you tried a new mat? I have had an old mat be the culprit in cutting issues. Good luck


~Aimee

DanaM.
PeaNut

PeaNut 117,179
November 2003
Posts: 375
Layouts: 0

Posted: 4/6/2013 8:08:08 PM
It was a new mat, but I have cut quite a bit..making decorations and need alot of them. There was two in the pack, I will try the other one. I wondered if I put the blade in wrong?
Dana

*kaleidoscope*
Leader of the Banned

PeaNut 52,171
October 2002
Posts: 17,623
Layouts: 105
Loc: Froogville

Posted: 4/6/2013 8:09:44 PM
sometimes paper lint gets up in there making it difficult for the blade to turn. Try taking the blade out and blowing into the hole.



DanaM.
PeaNut

PeaNut 117,179
November 2003
Posts: 375
Layouts: 0

Posted: 4/6/2013 9:35:20 PM
Thanks! I put in another new blade(i kept the old in case of operator error..lol) and a new mat. This fixed my problem.

Post Reply . Post New TopicShow/Hide Icons . Show/Hide Signatures
Hide
{{ title }}
{{ icon }}
{{ body }}
{{ footer }}