Using an older fiskars texture plate in the Big Kick?

Two Peas is Closing
Click here to visit our final product sale. Click here to visit our FAQ page regarding the closing of Two Peas.

Posted 1/19/2013 by Scrappinnut01 in General Scrappin'
 

Scrappinnut01
PeaAddict

PeaNut 101,443
August 2003
Posts: 1,374
Layouts: 0

Posted: 1/19/2013 7:06:50 PM
Has anyone done this? I'm new to the Big Kick and I found I had a bunch of those older Fiskars texture plates. They are the blue ones and I think when they first came out you were supposed to put your paper on top and go over it with and embossing ball thing. I tried to run it through my big kick, but I'm not getting a very good impression. I was wondering if anyone does this and maybe there is a different way to do the sandwich thing? I'd love to be able to put these things to use if I can.

pinkabella
PeaAddict

PeaNut 486,481
October 2010
Posts: 1,108
Layouts: 5
Loc: SF Bay Area, CA

Posted: 1/19/2013 7:19:57 PM
Not sure, but I'd imagine you'd need to put a soft/squishy mat underneath.
Uploaded with iPhone client

scrappnlori
PeaAddict

PeaNut 12,486
March 2001
Posts: 1,027
Layouts: 16
Loc: Northwest Missouri

Posted: 1/19/2013 7:26:34 PM
I use them in my cuttlebug and I have a rubber mat use on top and bottom of the plate.

Scrappinnut01
PeaAddict

PeaNut 101,443
August 2003
Posts: 1,374
Layouts: 0

Posted: 1/19/2013 7:28:12 PM
I just played around with it some more, and found if I put about 3 pieces of cardstock scraps on the bottom, it came out great. I also played around with those little,super thin brass stenciling plates and it worked really well, I did need to use some washi to hold the stencil in place because the first time it really moved around, but it also came out really well. So excited I can put these older supplies to use.

CKidd
BucketHead

PeaNut 8,696
December 2000
Posts: 640
Layouts: 152
Loc: Central NC

Posted: 1/19/2013 8:59:51 PM
I have had pretty good success if I lightly mist my paper with a spritz of water or alcohol first.

HTH,
Connie

KatyLouWho
Happy Happy Pea

PeaNut 249,656
February 2006
Posts: 5,036
Layouts: 95
Loc: New York

Posted: 1/19/2013 9:46:43 PM
I was going to suggest the misting of your paper before sending it through. Definitely get the squishy mats to put under the paper when you run it through the machine.

I would just be careful, don't push it through if it seems to be too tight,otherwise have fun! I forgot about the metal stencils I've got, and now I want to go play too!



revirdsuba
Wise~old Pea

PeaNut 17,460
June 2001
Posts: 23,096
Layouts: 94
Loc: Central NJ

Posted: 1/19/2013 11:10:03 PM
I use a piece of red plumber's gasket with the brass stencils, works well. The thinner one from Home Depot or Lowes. Costs about a $1. Have not tired the Fiskars texture plates yet.

ames0475
PeaNut

PeaNut 147,447
May 2004
Posts: 11
Layouts: 23
Loc: Southern Ohio

Posted: 1/21/2013 8:39:46 PM
I've done it many times - make sure you have a tight fit (I use paper as shims til I get the right fit). Also if you wet the paper just a bit you get a deeper impression. Be careful, I cracked the spider web one - I didn't realize I didn't have it in straight... I cracked the side edge of it.


~*~Amy~*~
http://ames0475.blogspot.com/
Uploaded with iPhone client
Show/Hide Icons . Show/Hide Signatures
Hide
{{ title }}
{{ icon }}
{{ body }}
{{ footer }}