Member Blogs


Member Since September 2009, 3 forum posts, 110 public projects

Location: Salt Lake City, Utah

PeaNut Number: 440088

TheImaginisce does not have a bio set.

You are viewing a single post. Click here to visit TheImaginisce's Blog

Tips & Tricks

i-top Tool: Tips for Tool Maintenance

For all of the i-top users (or future users) out there, we wanted to offer you some very important tool maintenance tips that will keep your tool working in tip top shape. Many times when you can't get a brad to work, it's because of the following three issues with the tool.

Click on the full-color image above and print out for easy reference.

1. Tighten Heads Before Use: Tighten the pink rubber heads with a simple twist BEFORE you begin...every time! The heads will not line up correctly if they're not tight...and when using the tool you might accidentally move the heads and not realize that you've loosen them. 2. Position Pink Rubber Heads: Often the small rubber head gets pushed down when removing the brad and needs to be repositioned, or pulled out into place. Check its placement before starting. If you find that your rubber heads are defective (torn, broken) please contact our customer service for a replacement. 3. Tighten Top Screws with Allen Wrench: The top screws on both sides of the tool can become loose with use or when being transported. We recommend that you use a 3mm Allen Wrench to tighten those screws periodically. But do not tighten them too tight or you will not be able to rotate the heads.
Now you are an i-top pro and should able to create many, many more brads, magnets, badges and buttons...maybe even more ideas we're creating!! If you have questions or concerns about your tool, please don't hesitate to contact our customer service by phone or email (

4/13/2010 10:39:28 AM | Comments (0) | Send a Message (PeaMail) | Vote for this Tips & Tricks

301 Moved Permanently

301 Moved Permanently

User Comments On This Blog Post

No comments have been posted for this post.

Comments disabled for this post.
{{ title }}
{{ icon }}
{{ body }}
{{ footer }}